Multi-Code 3028-50 Dual Channel Receiver

The MCS302850 is an auto sensing Multi-Code or Stanley compatible format gate receivers. They eliminate any chance of damage to either the gate operator or themselves from running off the wrong voltage. Nearly all gate operators offer either 12 or 24 volts AC or DC as accessory power. Because these two receivers are auto sensing, each recognizes the gate operator's correct voltage. As a result, installers can be assured of always having the correct model gate receiver on the truck.

The two receivers can operate from 12-30 volts AC or 10.5-30 volts DC and are normally powered from the gate operator. Their relay contact(s) are rated at 30 VAC/DC up to 5 Amps.

Each receiver supports transmitters that use the Multi-Code format (300 MHz), as well as the Stanley compatible (310 MHz) format. Both formats support the 512 system codes for the MC302850 (system codes are easy to set via dip switches).

The MCS302850 comes with two relays and replaces Linear models MCS302801 and MCS203102, both of which were housed in metal enclosures. The MCS302850 comes in a plastic housing that is easy to work with. It will operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate.

For more information, call 800-238-2301 or email us at sales@agw.net

• Dual frequency
• Multi-Code or Stanley compatible; jumper selectable12-24 Volts AC or DC
• Auto voltage sensing
• no jumpers to set
• Two relay
• Supplied with whip antenna, three feet of coaxial cable and bulkhead connector
• Power: 12-30 VAC or 10.5
• 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered

There are currently no related products to display.