DSP-6LP Low Power Multi-voltage Microdetector

The DSP-6LP vehicle detector is designed for solar powered gate applications. This detector will operate on any voltage from 10 to 30 Volts AC or DC and draws approximately 1 milliampere while waiting for a car.

The power LED winks continuously once per second to indicate the detector is operating in the low power mode. The DSP-6LP detector beats all competition for reliability, simplicity, and "no car" current consumption.

Working on battery-powered and other parking and access control loop applications, the DSP-6LP is preset to the normal sensitivity level used in parking/access control applications, and tunes itself to the best operating frequency.

This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. Environmental conditions are constantly compensated with the DSP-6LP's HYPERTRACK software.

For more information, please call 800-238-2301 or email us at sales@agw.net

NOTE:Power transformer not included.

• Loop Size - Works on any in-ground inductive loop from 20 to 1200 mH.
• Indicators - Separate Power and Detect LED's. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle.
• Sensitivity - Automatic - compensates for large loops and large lead-ins.
• Output Ratings - Single output, 1 amp relay at 30 VDC Resistive - The relay common, NO, and NC contacts are available.
• Power - 10 to 30 Volts AC or DC. Approximately 1 mA (no car and all loop sizes) and less than 25 mA with a car on the loop.

There are currently no related products to display.