DSP-22 One &Two Channel Detectors works with the DoorKing Operator

Another switch-less two-channel vehicle detector product designed to work with the DoorKing operators.

This detector is available with a solid state presence output on channel 1 and a N.O. and a N.C. relay output on channel 2.

The channel 2 detector also has a switch to operate in either the pulse or presence mode.

For more information, please call 800-238-2301 or email us at sales@agw.net

NOTE:Power transformer not included.

• Loop Size: Works on any in-ground inductive loop from 20 to 1200 mH.
• Indicators - Separate Power and Detect LED's. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle.
• Detect Memory - Power interruptions of short duration are ignored. If power fails for approximately 1.5 seconds or less the detector "remembers" a vehicle.
• Outputs - Solid-state (open transistor collectors) for both "Detect" and "Fail" outputs. 30 mA maximum current sink -transient voltage protected.
• Loop Failure - The green power indicator flashes twice per second if the loop circuit is open and 10 times per second if the loop circuit is shorted.

There are currently no related products to display.