Diablo DSP-40S Plug-in For the Elite Operator

At last a plug-in detector which will operate on any voltage from 10 to 30 Volts AC or DC. The DSP-40S detector is covered by United States patent number US 7,132,959 "Non-Interfering Vehicle Detection". These detectors are virtually cross-talk free in most applications.

This detector has been specifically designed to handle parking, drivethrough and access control applications where solid-state outputs are required for both the "Detect" and the "Fail" outputs. The sensitivity level may be changed.

Comparable to "Elite Loop Detectors".

For more information, please call 800-238-2301 or email us at sales@agw.net

NOTE:Power transformer not included.

• Loop Size: Works on any in-ground inductive loop from 20 to 1200 mH.
• Indicators - Separate Power and Detect LED's. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle.
• Detect Memory - Power interruptions of short duration are ignored. If power fails for approximately 1.5 seconds or less the detector "remembers" a vehicle.
• Sensitivity - compensates for large loops and large lead-ins.
• Outputs - Solid-state (open transistor collectors) for both "Detect" and "Fail" outputs. 30 mA maximum current sink -transient voltage protected.
• Loop Failure - The green power indicator flashes twice per second if the loop circuit is open and 10 times per second if the loop circuit is shorted.
• Power is 10-30 volts in either AC or DC

There are currently no related products to display.