Diablo DSP-11 Micro-Vehicle Detector

The DSP-11 Vehicle is a simple, switchless vehicle detector available with the industry standard 11-pin base.

Two models for your complete 11-pin vehicle detector needs:

The DSP-11-LV which will operate on any voltage and any polarity from 10 to 30 Volts AC or DC.
The DSP-11-117 operates on 117 VAC lines.

This series of Diablo's detectors are covered by United States patent number US 7,132,959 "Non-Interfering Vehicle Detection". These detectors are virtually cross-talk free in most applications and have been specifically designed to handle parking, drive-through and access control applications.

For more information, please call 800-238-2301 or email us at sales@agw.net

NOTE:Power transformer not included.

• Loop Size: Works on any in-ground inductive loop from 20 to 1200 mH.
• Indicators - Separate Power and Detect LED's. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle.
• Detect Memory - Power interruptions of short duration are ignored. If power fails for approximately 1.5 seconds or less the detector "remembers" a vehicle.
• Sensitivity - compensates for large loops and large lead-ins.
• Outputs - Both N.O. (closes for detect) and N.C. (opens for detect) outputs.
• Output Relay Ratings - 1A at 125VAC General use, 1A at 30 VDC resistive.
• Loop Failure - The green power indicator flashes twice per second if the loop circuit is open and 10 times per second if the loop circuit is shorted.
• This detector operates in the fail safe mode and will output a "Detect" for either of these loop failure conditions.
• This "Fail Safe" detector should always be used on "safety" loops.
• 5-year warranty

There are currently no related products to display.